Equipment Found

2 Available - These are used Darrington 50 bbl conical unitank fermenters. They are currently in use in a brewery but available for immmediate shipment. Dimensions are approx 16ft6in tall x 70in diameter. They are outfitted with shadowless manway doors, three cooling zones in the cone and sidewall, racking port/arm, prv, cip, side manway, cip, 4 legs with adjustable footpads, seperate port for the addition of a carbstone if desired. Price is per tank.

(1) available - Used BSV 40 bbl Fermenter- Item is a used BSV 40 bbl jacketed conical fermenters. This tank was installed in approximately 2015 and remains in excellent condition. Dimensions are approx 14ft. tall x 72in OD. The tank is outfitted with 3 cooling zones on the sidewall and cone. It is also outfitted with a side manway door, 4in. dry hop port, cip, prv, racking port with rotating racking arm, and four legs with adjustable footpads and cross bracing. The tank is currently installed but available immediatley. Price includes loading on buyers truck.

3 available - These are 40 bbl conical unitank fermenters built by ABT and last used in a brewery. These tanks are represented in excellent condition. These tanks measure approximatley 14 ft tall x 75 in diameter. The tanks are fitted with 3-zone cooling jackets in the cone and sidewall, side manway door, cip, prv, butterfly valves, racking port, and dry hop port. There is a seperate port for the addition of a carbstone so the tank can be used as a true unitank for fermentation/carbonation/packaging. Condition is excellent. These tanks are ready to ship. Price is per tank.

UL listed (with UL508a label) Mill Room Control Panel with Remote Mount Stop Button including the following. 1. (Qty.1 each) UL NEMA 4X Mill Room Control panel including the following: • Wiring schematic provided DPS based on request received and below assumptions listed • Hardware selection based on supplied control panels following same structure. • Proposal assumes 208/230VAC 3 phase with neutral (for 120VAC) for supply voltage to control panel • Completed control panel to include: o NEMA Type 4x wall mount enclosure with back panel o Main incoming 3 pole Non-fused disconnect switch through the door disconnect handle, and adder block for incoming Neutral wire connection o Roller Mill (RM1) 3hp, 208vac 3ph, 11fla Controls include:  3pole din mount circuit breaker rated at 20amps  16amp starter w/120VAC coil including adjustable overload (11-17FLA)  Green Illuminated Start Push Button  Red Non-Illuminated Stop Push Button • RM1 motor will not run unless Flex Auger AG1 is running o (3 (will be dependent on Flex Auger Qty. selected)) Flex Augers (AG1, AG2, AG3) 3/4hp, 230vac 3ph, 3.5fla Controls include:  (3) 3pole din mount circuit breakers rated at 10amps each  (3) 9amp starters w/120VAC coil including adjustable overload (4- 6.3FLA)  (3) Green Illuminated Start Push Buttons  (3) Red Non-Illuminated Stop Push Buttons o 120VAC Control Function to include:  120VAC Single Pole din mount circuit breaker rated at 10amps  2 position Control Power “OFF-ON” selector switch  120VAC Ice Cube Relay wired for Field installed remote E-Stop to deenergize Control Panel  120VAC White Control Power Pilot Light for Control Power indication  120VAC Red Pilot light for indication of Remote Stop Push Button Pressed • DPS to supply phenolic labeling for door mounted devices based on layout example of previous project. • Control Panel field Terminal block interface for Control Connections • Customer source inspection included if requested prior to delivery. • Completed Control Panel to bare UL508a label BREWHOUSE CONTROL PANEL WITH 1 FLEX AUGER: $4273.28 ADDER OPTION: • DPS to supply for Customer install and wiring (1) Killark Remote Stop (E-STOP) Maintained Mushroom Head Single Hole PUSH-PULL Button Station for Hazardous locations: o Killark Model #FXCS-0MMR3 remote Push-Pull Station (Maintained) o Killark Model #FXB-2 Back Box for Push-Pull Station ADDER OPTION: $594.00 Total price- $4867.28 plus shipping – TBD

New stock - 30 bbl (930 Gallon) BSV Cold Liquor tank. This tank is fitted with dimple jacket for cooling (2 zone). The tank is all stainless construction with insulation and stainless steel cladding. The tank is outfitted with a top manway door and also includes over fill pipe. Dimensions to be determined Optional - Thomsen 1hp washdown pump - Add $1600

Item is a used Cherry Burrell 3000 Gallon storage tank. Previous use was water storage in a brewery. The tank configuration is dome top with a dish bottom. Tank is fitted with a calandria in the bottom for heat transfer. The sidewall is insulated and stainless steel clad. Dimensions are 14ft tall x 86in od. This would be ideal for insulated storage and can also be used to heat liquid using the steam calabdria.

Item is a used Stout 30 bbl jacketed bbt with valves and fittings. This tank was built in 2014 and used in a brewery up until removal recently. It is represented in excellent condition with jacketed sidewall and bottom, valves, and fittings. This tank is availabe for immediate shipment.

(3) available - These tanks are used 30 bbl (approx 1150 Gal) jacketed conical fermenters. These were built in 2014 by Stoudt and remain in excellent shape both mechanically and cosmetically. They are outfitted with cooling zones on the sidewall and cone. They include valves and fittings, cip, prv, pressure gauge and dry hop port. Price is per tank and these are ready to ship immediately.