Equipment Found

Item is a used, Inline Filling Systems, automatic, six head, inline, ionized air, bottle/jar rinser. Machine is currently set up with automatic container indexing controls, but no conveyor is included..

Item is a used, Warren Rupp Sandpiper, heavy duty, flap valve, Stainless steel, double diaphragm pump w/2" ports. It is mounted on S/S cart.

Item is a used, Alfa Laval, model SRU5 NLS, positive displacement pump. Pump is equipped with three lobe rotors for gentle product handling. It is rated at approximately 30 gallons per 100 revolutions (maximum of 600 RPM). Pump has three inch, sanitary threaded ports. It is powered with 7 !/2 HP moltor. Previous use was dairy.

Item is a used, Loveshaw/Little David model LD-3SB2, semi-automatic case taper.. This is a side belt drive machine set up for 2" wide tape. Side belt design accommodates sealing small or unstable (even empty) cartons. Power requirement is 120 VAC. (NO COMPRESSED AIR REQUIREMENT) (Was mated to ITEM #7552 - BelCor 505 case erector)

Item is a used bulk bottle depalletizer set up for 44 x 56' contgainer pallets. This is a full height machine capable of handling glass containers. Machine is set up with dual chain pallet infeed. It has a mat-top container accumulation deck with perpendicular conveyor discharge. Machiine is PLC controlled and set up for 460 volt/3-phase power. It is still in line but not in use. Reason for replacement was it was difficult to operate above 400 BPM.

Item is a used, Waukesha, size 15, positive displacement, S/S pump. Pump has 1 1/2 inch ports. The pump is mounted on a mild steel, painted cart and is powered with a NEW/UNUSED, Sumitomo, 1 1/2 HP motor/gear-box. Gear-box ratio is 3:1 with final output RPM of 583. Drive for the pump is through a NEW/UNUSED VFD and electrical enclosure with the power requirement being 220 volt/3-phase..

Item is a used, WS Packaging model Lightning 50 label applicator. The machine was manufactured 10-30-2018. It is mounted on a S/S, "T" base stand for mobility and includes the powered back belt assembly. It has an AB Micrologix control panel. Both the labeling head and the back belt assembly are stepper motor driven. Machine is set up for #3 wind (RH machine). It is capable of applying a 6" high label. Power requirement is 110 volt, single phase.

Item is a used, WS Packaging model ASD Compact label applicator. The machine is mounted on a S/S, "T" base stand for mobility and includes the powered back belt.It has an AB Micrologix control panel with stepper motor drive system and operates on 110 volt, single phase power. It is set up for a #4,wind, LH machine. It is capable of applying a 6" high label.