Equipment Found

Item is a used, SWF McDowell, automatic, hot melt case erector. Min/max case range is 5.75" L x 5.75"W x 10"H / 24"L x 24"W x 33"H. Machine is rated at up to 30 CPM depending on carton size and board characteristics. Machine dimensions are 88" long x 68" wide x 64" high. Push button controls. Machine is equipped with Dynatek hot melt glue system. Some spare maintenance parts included. Power requirement is 230 volt/3-phase/60hz.

Item is a used, Best Pack, top/bottom, semi-automatic case taper. The machine is equipped with side belt drive and 2" tape heads. Power requirement is 120 VAC.

Item is a used, OK Durable, semi-automatic, top/bottom case taper. Machine is equipped with 3" top/bottom tape heads and utilizes side belts to power the cartons through the machine. It is equipped with compression rollers and casters. Case size = Min. 5" L X 4" W X 5" H Max Unlimited length X 20"W X 20" H. Power requirement is 120 volt/single phase.

Item is a used, WEXXAR, fully automatic, hot melt case erector.. Machine utilizes patented pin/dome system, no vacuum utilized on the forming jaws for positive carton squaring. Machine is equipped with a Nordson Pro Blue hot melt glue system. Case range 7.25" x 18" long, 7.25" x 14" wide, 6" x 15" deep. Machine run tested. Machine is rated at up 20 CPM depending on carton size and board characteristics. Power requirement is 230 volt, 3 phase.

It is a used Delkor model TFS (Trayfecta S series) former. The machine is capable of forming trays, cartons, and cases depending on application. Machine was manufactured in late 2015 and installed in 2016. It is equipped with a Nordson ProBlue 10 hot melt glue system. This is a single head machine capable of up to 55 cycles per minute depending on application. Tool-less changeover (manufacturer states changeover can be accomplished in 3 minutes). S/S construction. Power requirement is 480 volt/3-phase and requires 15 SCFM @ 80 PSI when operating at full capacity.

Item is a used, Hartness, model 825, fully automatic, drop style case packer. This is an all S/S machine set up for 460 volt/3-phasee operation. The machine was previously operating in a bottled water facility and has multiple grid sets, primarily 3 x 4 pack pattern. Carton and container flow is in the same direction. Includes double wide 7 1/2 wide chain by 7' conveyor side rtransfer to the packer.

Irtem is a used, BelCor model 505 - GS Versa Pack, pneumatic case erector. Power requirement is 120 volt/1-phase/60 hz. The BelCor 505 pack station requires compressed air.

Item is a used, Elliott, hot melt, top only case sealer model 76-10 custom. The machine is equipped with a Nordson Prolblue glue system and Saturn right angle nozzles. The infeed end of the machine is fitted with a case elevator, case infeed indexer, and case pusher. The machine was set up for bag-in-box sealing but can be adapted to standard case. The machine is rated at a maximum of 1,400 CPH. Equipped with OSHA gusarding and door interlocks. Integral PLC control panel located right side of machine - 460 volt/3-phase/60 hz