Equipment Found

Item is a used, Hartness, model 100, automatic drop packer. This machine is of mild steel construction and is painted white. It is equipped with stainless steel lane dividers and Eurodrive, variable speed motors. The machine has a left hand carton discharge. Electrical specifications are 230/460 volt, 3 phase, 60 hz. The machine was previously running soda bottles in a Coke facility. The machine was removed from service in June of 2010.

Item is a used Best Pack, semiautomatic top and bottom case taper

Item is a used Durable, fully automatic, case erector/bottom taper. This machine operates on air logic. It features tool-less change over and is rated by the manufacturer at up to 20 CPM. It utilizes side belts to grip the carton and carry it through the tape head. Machine features positive carton erecting/squaring. Case size range is L=7-20 inches; W=6-16 inches; H=4-16 inches. Electrical input is 120 volt, single phase.

Item is a used IAC Model 20000 uncaser. This machine is all stainless construction. It is a high speed rotary head uncaser. The machine is designed to decase bottles with a rotary head from full depth reshippers cartons. Included with the machine is one, 5 station rotary head. The head configuration is 4 wide x 6 long 24 pack. The machine is equipped with a 1.5 hp SEW eurodrive, vari-speed motor with 33.11:1 gear reduction unit. Electrics are 230-460/3.

Item is a used WEXXAR case erector. The machine was originally equipped with a cold glue system. That system has been removed and the machine was last utilized to erect cartons but not seal the bottoms. A hot melt glue system could be added at additional charge.

Item is a used, Sabel, model SE, case erector/packer. This machine is designed to form the cartons and pack 1 Lb. tubs of butter or margarine. It has the laner mechanism as well as multi layer capability and utilizes a tape seal for the top and bottom of the carton.

Used Arpac shrink bundler and heat tunnel. This is a model 60-28. It is a\'straight through model capable of production rates of up 40 trays per minute depending on tray size. It will accept a film up to 28 inches in width and has an 11.5 inch high seal bar. The machine is mild steel construction. It has a dual zone heat tunnel It is set up for 460 volt operation. Machine manual and film roll boom are included. Touchpad interface as well as touchpad digital speed controls for the infeed conveyor and main drive. PLC controlled.

Used Bishamon, electric pallet positioner (lift). The machine operates on 110 volt, single phase power. It has a foot switch to initiate up/down motion. The pallet platform measures 4' by 4' and has a carrousel feature. Lift capacity is 2000#.