Equipment Found

Item is a used, mattop accumulation conveyor measuring 18" wide by 9 feet long. The frame and legs are S/S. Currently set up with guide rails and the drive motor on the right side discharge.

Item is a used, Inline Packaging Systems, 42" diameter, S/S, rotary accumulation table. This table is designed as a "pack-on" table with a built-in dump table.to accommodate the dumping of containers from the cartons and pushing them onto the feed disk which powers them onto the conveyor. The disk is powered with a 1/8 HP, DC drive gearhead motor providing variable speed capability..

stem is a used, Inline Packaging Systems model RSC, 8 head, liquid container rinser. The machine counts, grips, and inverts the containers over a nozzle manifold and recovery tray, and discharges water into the container hitting the bottom of the container. Rinse and drain times are adjustable.. The bottles are then rotated back to their original up -right position and discharged on the conveyor to the filler.. Conveyor is 4 1/2" wide by 10' long. Touch pad controls. 120 volt/single phase power requirement

The item is a used, Wild Goose 600+, carbonated/still product canning line. The line includes a SKA Fabrication, fully automatic, small footprint can depallaetizer. This machine is set up with left side discharge. Discharge is onto side-by-side twist/rinse chutes for 12 oz. and 16 oz.202x211 cans. Cans are fed into the Wild Goose,model 600+, dual lane filler/seamer having 4 fill heads and one seamer head per lane. After filling/seaming cans are conveyed through a pair of Carleton plate inverters where the bottom of the can is coded with a non contact, Hitache ink jet coder (at this point I am not sure if the Hitachi coder is included in the package). After coding, cans are conveyed through a Pack Leader model 501 pressure sensitive labeler having #4 wind. The conveyor on this machine is utilized with the labeling head turned off when pre-decorated cans are being packaged. The cans than enter the Pak Tech mod. 120/180 machine where the plastic over-cap/carrier is applied to form 4 and 6 packs of cans. There is a minimal amount of conveyor in this line and it takes up very little space. The line ran at 85-90 CPM.

Item is a used, AVT model SH083, sterile, cartridge type filter housing.

Item is a used, Marchisio, 1,000 liter (265 gallon), S/S, closed top, jacketed tank w/top manway, and valves.

Item is a used GAI model 42903, stand-alone, rotary, 3 head ROPP capper. The machine is et up for a 29mm ROPP cap. The machine is rated at up to 5,500 BPH and was running @ 86-89 BPM. The machine was manufactured in 2020. Power requirement is 480 volt/3-phase/60 Htz. The machine was removed from service in 1-2022. New price for this machine was over $135,000 and condition is excellent.

Item is a used, WEXXAR, fully automatic, hot melt case erector.. Machine utilizes patented pin/dome system, no vacuum utilized on the forming jaws for positive carton squaring. Machine is equipped with a Nordson Pro Blue hot melt glue system. Case range 7.25" x 18" long, 7.25" x 14" wide, 6" x 15" deep. Machine run tested. Machine is rated at up 20 CPM depending on carton size and board characteristics. Power requirement is 230 volt, 3 phase.